Lauren954 wrote:
I'm not finding anything that says signal level. I'm sorry, but I'm confused. Am I supposed to be in settings, or in the back end system menu (exit, down, down, 2) ? Please guide me through the menu, as I am not familiar with the X1 at all.
it is the firmware diagnostic menu (the long-press-exit down down 2 menu that appears in all white background on top of your regular image).
Once you have the menu up, it is highlighted on "summary" press OK button then down. That gives power per channel (ideal is 0 dbmv) and SNR (signal to noise ratio). It also identifies if you have 5 or 6 tuners available (will show tuner-6 if have 6).
press down again and you will see the errors (fail to tune) for each tuner - ideally should be all zeros.
press down to MoCA and hit Ok button, then down.When the numbers fill in after some time, each number that is not zero should be 200+ (i've got several in the 160 area and have no problems that i've noticed).
press exit button on remote to exit.